Eleven separate checks
Architecture, boot method, CPU compatibility, core count, frequency, DirectX + WDDM 2, disk partition type, RAM, Secure Boot, storage and TPM — each with its own result line and the value it found.
WhyNotWin11 is a free, open-source tool that checks whether your PC meets Windows 11 system requirements. It analyzes hardware compatibility, including TPM, CPU, RAM, Secure Boot, storage, and boot mode. The tool provides clear results, helping users identify which requirements their computer meets or fails.

WhyNotWin11 is a free, portable Windows utility that tests your PC against each Windows 11 requirement and shows a separate result for every check. Where Microsoft's own tool can give a single yes or no, WhyNotWin11 tells you which part failed — the first step toward fixing it.
Independent developer Robert C. Maehl. Written in AutoIt and released under LGPL-3.0, so the full source is public.
Eleven items: architecture, boot method, CPU compatibility, cores, frequency, DirectX + WDDM 2, GPT disk, RAM, Secure Boot, storage and TPM.
Every check gets its own pass or fail line, so you can see whether the problem is a setting you can change or hardware you cannot.
64-bit CPU and 64-bit Windows
Windows 11 ships only as a 64-bit system. A 32-bit copy of Windows fails here even when the processor itself is 64-bit capable.
Fixable with a clean 64-bit installUEFI firmware (not Legacy BIOS/CSM)
Older installs often boot through Legacy or CSM mode. Most PCs from the last decade can switch to UEFI once the disk is GPT.
Usually fixableProcessor on Microsoft's supported list
The check compares your exact processor model with Microsoft's Intel, AMD and Qualcomm lists. Older generations are excluded.
Not fixable in software2 or more cores
Counts physical cores, not threads. Nearly every PC sold since 2010 passes this one.
Not fixable in software1 GHz or faster
Uses the processor's rated speed. A fail here usually points to very old or low-power hardware.
Not fixable in softwareDirectX 12 graphics with a WDDM 2.0+ driver
Often fails only because a generic or outdated display driver is installed. A current driver from the GPU maker frequently turns it green.
Usually fixableGPT partition style
Windows 11 boots in UEFI mode, which needs a GPT system disk. MBR disks can be converted in place with Microsoft's MBR2GPT after a backup.
Usually fixable4 GB or more
Reads installed memory. Desktop PCs and many laptops with free slots can be upgraded.
Fixable with hardwareSecure Boot capable
Windows 11 needs the capability. WhyNotWin11 passes a PC where Secure Boot is supported but switched off, and fails one where it is missing.
Usually fixable64 GB or larger system drive
Checks the size of the drive Windows lives on. Small eMMC tablets and old SSDs are the usual fails.
Fixable with hardwareTPM 2.0 present and enabled
Many PCs have a firmware TPM (AMD fTPM or Intel PTT) that is simply switched off. TPM 1.2-only hardware cannot be changed in software.
Usually fixableWhyNotWin11 shows each result with an icon and text. A question mark means the check could not be completed — often because the tool lacked administrator rights or ran inside a virtual machine.
Architecture, boot method, CPU compatibility, core count, frequency, DirectX + WDDM 2, disk partition type, RAM, Secure Boot, storage and TPM — each with its own result line and the value it found.
One .exe of about 2.2 MB. No installer and no setup wizard; run it from Downloads or a USB stick.
Released under LGPL-3.0 by Robert C. Maehl. The AutoIt source code is public and can be compiled yourself.
When the PC is online, it downloads the latest Intel, AMD and Qualcomm supported-processor lists at start-up. Offline, it uses the lists built into the file.
Switches for /silent, /skip, /drive, /force, /fuonly and /update. Silent runs report compatibility through the exit code — 0 means compatible.
Save results with /export. Without a file name the report is named after the computer; add /extras for build, OS, language or user columns.
Checks hardware before Windows is installed. The x86 build covers 32-bit WinPE.
/fuonly reads Windows' own feature-update compatibility indicators instead of running the hardware checks.
The 2.7.0 source includes 62 language files, and the interface follows your Windows display language.
Administrators can set registry policy values such as NoUpdate, NoSocials, NoSettings, NoProgress and ForcedMUI to control the interface.
Version 2.7.0.0 adds advanced theming: a theme file placed in the Themes folder next to the program is applied when it starts.
Recommended
Recommended for almost every Windows 10 and Windows 11 PC.
SHA-256
433bca5da906c35029a7cdf55f0739553602649f58acd2b9cdebafdeaba23edb
File served by this site — an unmodified copy of the official WhyNotWin11 2.7.0 release (SHA-256 matched on 12 November 2026).
Alternative build
Only for 32-bit Windows installations or 32-bit WinPE.
SHA-256
fadced08bac46a94b6556a5eda522b2bd60d90a143e282ca80d6741be9765d25
File served by this site — an unmodified copy of the official WhyNotWin11 2.7.0 release (SHA-256 matched on 12 November 2026).
winget installs the same official release. The package ID is rcmaehl.WhyNotWin11.
winget install --id rcmaehl.WhyNotWin11 -eWhyNotWin11 is a free, open-source project by Robert C. Maehl, released under the LGPL-3.0 licence. This is an independent website and is not the official project website, and is not affiliated with or endorsed by the developer or Microsoft. Windows is a trademark of Microsoft Corporation.
Limitation: a web browser cannot read your TPM, Secure Boot, BIOS mode, CPU model or disk partition style. This helper combines a few browser hints with values you look up in Windows. For a real result, run WhyNotWin11.
Your answers stay in your browser. Nothing is sent to this website.
| Part | Minimum | Recommended |
|---|---|---|
| OS | WinPE or Windows 8.1 | Latest Windows 10 build |
| CPU | 32-bit single core | 64-bit dual core or higher |
| RAM | 40 MB free | 100 MB free |
| Disk | 5 MB free | 100 MB free |
Other operating systems are unsupported; 2.3.0.5 was the last version known to run on Wine. The /force switch runs it on unsupported systems without support. Source: project README.
| Part | Minimum |
|---|---|
| Processor | 1 GHz+, 2+ cores, 64-bit, on the supported list |
| RAM | 4 GB |
| Storage | 64 GB or larger |
| Firmware | UEFI, Secure Boot capable |
| TPM | Version 2.0 |
| Graphics | DirectX 12, WDDM 2.0 driver |
| Display | 720p, larger than 9″ diagonal, 8 bits per channel |
Upgrading through Windows Update also needs Windows 10 version 2004 or later. Source: Microsoft's Windows 11 specifications.
Get WhyNotWin11.exe from the download section above.
Compare the SHA-256 in PowerShell with the published hash.
Double-click the file. There is no installer.
Choose Yes so it can read TPM and Secure Boot state.
Each of the 11 checks shows a pass, fail or question mark.
Optional: save results with /export CSV, TSV or TXT.
Yes. WhyNotWin11 is free, open-source software under LGPL-3.0, and downloading it here costs nothing. There are no paid editions, accounts or ads inside the program.
Choose WhyNotWin11.exe (64-bit) for almost every PC. WhyNotWin11_x86.exe is only for 32-bit Windows or 32-bit WinPE. Settings → System → About → System type tells you which you have.
It is portable. The single .exe runs straight away after the User Account Control prompt. It keeps helper files such as language and CPU lists in %LocalAppData%\WhyNotWin11.
No. This is an independent site, not the official project website. The files here are unmodified copies of the official release, with matching SHA-256 hashes.
The genuine file is open source and widely used. Safety depends on getting that genuine file, so compare the SHA-256 on this page before running it, and avoid repacks and forks.
The file is not code-signed and is not downloaded as often as mainstream apps, so it lacks reputation. Confirm the hash first; only then choose More info → Run anyway.
No settings are changed. It reads system information, may download updated CPU and PCI lists to its AppData folder when online, and writes a file only when you export results or use /update.
Yes. Without a connection it uses the CPU and hardware lists built into the file, which may be older than the online lists.
A question mark means a check could not finish — run it as administrator and outside a virtual machine. A red CPU line means the model is not on Microsoft's list; that is hardware, not a setting.
Yes. Version 2.7.0.0 supports Windows PE, so technicians can check hardware before Windows is installed. Use the x86 build on 32-bit WinPE.
Most PCs from 2017 onward have a firmware TPM. Enter UEFI setup and enable AMD fTPM or Intel PTT. For Secure Boot, the disk must be GPT and the firmware in UEFI mode first; then enable Secure Boot.
When the PC is online it downloads the latest Intel, AMD and Qualcomm lists from the project on start-up. You can also fetch a new build with WhyNotWin11.exe /update.